Designed for repeated insertion and extraction the MicriTec range of test leads are available with a variety of connectors to suit almost any test and measurement need.
The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.
The crocodile (gator) clips are fully insulated with a 4mm socket in the handle, offering an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 11mm jaw opening limit.
The 4mm socket in the back of the Dolphin clip offers an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 30mm opening diameter limit.
The insulation piercing test clips allow the user to provide the exact pressure needed to pierce the insulation of a wide range of wire types and sizes. The clips also feature a rotating banana jack that prevents the test lead from twisting and allows the test equipment to be kept in the circuit while the wire is pierced, providing immediate confirmation that contact with the conductor has been made.
BNC plug to 4mm adapter
Test lead - BNC plug to 4mm plugs (1.8m)
Test lead - BNC plug to BNC plug (1.8m)
Test lead - BNC plug to crocodile clips (1.8m)
The TA000 test lead has been custom made for automotive use with the ADC-212. Its long length (3 meters / approx 10 ft) allows the oscilloscope to be placed on the work bench away from the car being tested / repaired. A wide range of probes, clips and gators can be plugged into the 4mm connectors at the end of the cable. The cable is fully screened to reduce noise pickup.
